cecotec CREMMAET TEMPO Instruction Manual page 63

3.6.4. Machine settings
Drinks settings
-
After selecting this menu, the machine will display all available drinks settings. After selecting
the drink you want to configure, 2 icons appear at the right of the drink.
The first icon allows you to change the appearance position of the selected drink in
-
the preset drinks list on the main screen. To do this, press the icon of the drink you
want to move and press the new drink you want to change the position of.
The second icon allows you to configure everything related to the characteristics of
-
the drink itself.
o Drink name - Change to: this section allows you to rename the selected drink,
either in your chosen language or in English.
Image: to replace the image, you must insert a USB drive at the bottom left of
o
the display.
NOTE: the image to be replaced in the drink must respect an image size of
o
390x355 pixels, maximum 2 MB in size, in PNG format and the file name may
only contain letters and numbers.
o Sequence: this section allows you to select the order in which the different
drinks appear, coffee, hot water, and milk froth. Please note that some drinks,
such as the use of milk and water, are incompatible in the order of the sequence
of drinks.
o For the configuration of the drinks sequence, drag the colour blocks to the
desired step in the diamonds just above them.
o Steps: this sequence allows you to adjust each parameter for each step. These
parameters have been explained in section 3.4 "Drinks preparation".
You can test the selected configuration to see if it is to your liking, if so, press
o
Save to save the final drink configuration.
NOTE: you can switch between users by pressing on the user icon at the top centre of the
display. Remember that each user has their own preset drinks.
User settings
-
This section is explained in section 3.5 "Users".
Maintenance settings
-
In the following section you can adjust the maintenance parameters of the machine, such as
when the appliance will demand cleaning.
Preheating setting for brewing system This system allows us to heat the brew unit
-
with hot water to improve the subsequent extraction of the coffee. The appliance will
ask you whether or not you want to warm up. For example, if you select 5 minutes,
after 5 minutes you will be asked before making the coffee whether or not you want
to warm up. After that coffee, you must wait 5 minutes for the appliance to ask you
again if you want to heat up the brew unit.
ENGLISH
63
CREMMAET TEMPO