To release Dial Block:
1.
Press the Speaker key.
2.
Dial 600.
3.
Dial the 4-digit Dial Block Code.
4.
Dial 0.
Note:
5.
Press the Speaker key to hang up.
Note:
ACCOUNT CODE ENTRY
To enter an Account Code any time while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You
can use this procedure if your system has Optional Account Codes
enabled. You may also be able to use this procedure for incoming calls.
1.
Dial
.
*
Press your Account Code key (Service Code 751: code 50).
2.
Dial your Account Code (1~16 digits, using 0~9 and #).
Note:
3.
Dial
.
*
Press your Account Code key (Service Code 751: code 50).
Confirmation tone is heard.
At default, Dial Block restriction Class per Extension is denied.
- OR -
If Account Codes are hidden, each digit you dial will show an
"
" character on the telephone's display.
*
- OR -
30