Figure 3-6 Placing The Ac Adapter Cord Inside The Wall Mount Stand; Figure 3-7 Placing The Base Unit On The Posts Of The Wall Plate - NEC Dterm DTL-8R-1 Owner's Manual

term
D Cordless DECT
___________________________________________________________________________________
___________________________________________________________________________________
Owner's Guide
3. Place the AC adapter cord inside the molded channel of the wall mount
stand.

Figure 3-6 Placing the AC Adapter Cord Inside the Wall Mount Stand

4. Plug one end of the short telephone cord (locally supplied) in the LINE
jack on the base unit. Plug one end of the NEC digital multiline
telephone into the PHONE jack. Place the telephone cords inside the
molded channels on the bottom of the wall mount stand.
5. Plug the other end of the short telephone cord into the modular wall jack
in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and push down until it
is firmly seated.

Figure 3-7 Placing the Base Unit on the Posts of the Wall Plate

Document Revision 1
3 - 5