Wall-Mounting The Charger - NEC DSX CORDLESS LITE II Manual

Wall-Mounting the Charger

To wall-mount the charger (Figure 10: Wall-Mounting the Charger):
1. Choose a suitable location for the charger wall-mount bracket within 6 feet of an AC outlet.
2. Install suitable fasteners 1 3/16" apart, leaving the heads out about 1/4".
3. Run the AC adaptor cord through the notch in the bottom of the wall-mount bracket and up through the
rectangular cutout in the bracket.
4. Place the wall-mount bracket on the fasteners and tighten.
5. Run the AC adaptor cord through the strain relief on the back of the charger, then plug the cord into the
charger.
6. Snap the charger onto the wall-mount bracket.
7. Plug the AC adaptor into the AC outlet.
1-3/16"
Wall
DSX Cordless Lite II Telephone User Guide
Figure 10: Wall-Mounting the Charger
Installation
Charging the Handset
Wall
Chapter 1: Installation ◆ 11
1