Installing The Belt Clip - NEC DSX CORDLESS LITE II Manual

Installation
Using the Belt Clip
Using the Belt Clip

Installing the Belt Clip

To install the belt clip (Figure 11: Installing the Belt Clip):
1. With the open end of the clip facing away from the antenna, snap the belt clip onto the handset.
To remove the belt clip (Figure 12: Removing the Belt Clip):
1. Gently pry the belt clip prongs out of the slots in the handset.
12 ◆ Chapter 1: Installation
Snap prongs into slots
Figure 11: Installing the Belt Clip
Pry prongs up from slots
Figure 12: Removing the Belt Clip
Snap prongs into slots
on other side
DSX Cordless Lite II Telephone User Guide