Installation
Using the Headband Style Headset with your Cordless Telephone
2. Remove the ear cushion.
3. Snap on the earloop ring. (Make sure the earloop ring lies flat against the microphone boom as shown.)
4. Insert the earloop into the earloop ring. (Installation for the right ear is shown. For the left ear, insert the
earloop from underneath the earloop ring.)
16 ◆ Chapter 1: Installation
Figure 18: Removing the Ear Cushion
Figure 19: Snapping on the Earloop Ring
Figure 20: Inserting the Earloop into the Earloop Ring
DSX Cordless Lite II Telephone User Guide