Wall-Mounting The Charger - NEC DS1000 User Manual

Wall-Mounting the Charger

To wall-mount the charger (Figure 10: Wall-Mounting the Charger):
1.
2.
3.
4.
5.
6.
7.
1-3/16"
Wall
DS1000/2000 Cordless Telephone User Guide
Choose a suitable location for the charger wall-mount bracket within 6 feet of an AC outlet.
Install suitable fasteners 1 3/16" apart, leaving the heads out about 1/4".
Run the AC adaptor cord through the notch in the bottom of the wall-mount bracket and up
through the rectangular cutout in the bracket.
Place the wall-mount bracket on the fasteners and tighten.
Run the AC adaptor cord through the strain relief on the back of the charger, then plug the
cord into the charger.
Snap the charger onto the wall-mount bracket.
Plug the AC adaptor into the AC outlet.
Figure 10: Wall-Mounting the Charger
Installation
Charging the Handset
Wall
Chapter 1: Installation ◆ 11
1