Table of Contents
Advertisement
Feature Operation
Line Queuing and Callback
Line Queuing and Callback are disabled by default.
To queue for a busy line:
1. Press line key for busy line.
OR
Press TALK and dial line's Direct Line Access code (e.g., 101 for line 1).
2. Dial 2 ; do not hang up.
3. When the line becomes free, you automatically connect.
- When you hear dial tone from the line, you can place your call again.
To leave a Line Callback for a busy line:
1. Press line key for busy line.
OR
Press TALK and dial line's Direct Line Access code (e.g., 101 for line 1).
2. Dial 2 + Hang up.
3. When the line becomes free, the system automatically calls you back.
- You must answer within 4 rings or the system cancels the Callback.
Meet-Me Conference
Meet-Me Conference is enabled by default.
To set up a Meet-Me Conference:
1. Press TALK .
2. Dial *1 + Dial a page zone number + Announce Meet-Me Conference code (#11 or #12).
3. Press TRANSFER + Dial the announced Meet-Me Conference code.
To join a Meet-Me Conference:
1. Listen for page announcing the Meet-Me Conference.
2. Press TALK .
3. Dial the announced Meet-Me Conference code (#11 or #12).
Message Waiting
Message Waiting is available by default, but only in systems without voice mail installed.
To leave a Message Waiting:
1. Place Intercom call to co-worker + Dial 8 .
- The extension you call can be unanswered, busy, or in Do Not Disturb.
To answer a Message Waiting:
- Your "New Mail" icon indicates that you have a Message Waiting.
1. Press TALK + Dial *8 .
30 ◆ Chapter 2: Features
DSX Cordless Lite II Telephone User Guide
Advertisement
Table of Contents
