Icom IC-7760 Operating Manual page 2

System requirements
Use a PC that meets the system requirements as described below.
Minimum system requirements
Microsoft
Operating
Microsoft
System
L Except for Windows on ARM.
L These instructions are based on Microsoft
USB ports USB 3.0
USB 3.0
USB cables
L When using N1MM Logger+ and CW Skimmer to check the wide band, another USB cable (2.0) is required.
We recommend that you use the on-board sound chipset. The CPU may have a heavy load when
Remarks
an external sound device, such as a USB audio converter, is used.
These are the minimum system requirements to use the IC-7760 with the HDSDR application. Depending on your
PC environment (permanently running software such as antivirus software, peripheral devices, settings of OS and
other software), the operation of the IC-7760 with the HDSDR application may not perform properly.
Operation notes
• Before connecting or disconnecting a USB cable,
turn OFF the controller.
• Depending on your PC environment, the USB audio
may be interrupted, or control by the PC software
may be delayed.
• If the CPU has a heavy load, the USB audio is
easily interrupted. If the audio is interrupted, set a
lower sampling rate in the HDSDR application or
close other applications, if running.
Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Microsoft and Windows are trademarks of the Microsoft group of companies.
HDSDR is the property of Mr. Mario Taeubel (DG0JBJ).
CW skimmer is the property of Afreet Software, Inc.
Null-modern emulator (com0com) is an open source software based on the GPLv2 license.
VB-Audio Hi-Fi Cable is the property of Mr. Vincent Burel.
N1MM Logger+ is the property of Mr. Thomas F Wagner (N1MM).
All other products or brands are registered trademarks or trademarks of their respective holders.
® Windows ® 11 (64 bit)
® Windows ® 10 (32/64 bit)
® Windows ® 11.
• To operate your PC and peripheral devices, follow
the instructions provided in their manuals.
• This USB I/Q Package is designed only for the
IC-7760. Icom does not guarantee its use with other
transceivers.
2