Rear Panel - SMC Networks EZ109DT User Manual

A EZ S
BOUT THE
LED
Gigabit Port
LINK/
ACT
10/100M
1000M
FDX/
COL

Rear Panel

The AC power receptacle is located on the rear panel of the
switch.
4
10/100
WITCH
Port and System Status LEDs
Condition
Off
On
Flashing
On
On
On
Off
Flashing
Status
The port has not established any network
connection.
The port has established a valid network
connection.
The port has established a valid network
connection and traffic is passing through the
port.
The port has established a valid network
connection and communications have been
set to 100 Mbps.
The port has established a valid network
connection and communications have been
set to 1000 Mbps.
The port is in full-duplex mode.
The port is in half-duplex mode.
Packet collision is occurring in half-duplex
mode.
100-240V~ 50-60Hz 0.3A