SMC Networks EZ109DT User Manual page 7

FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual may cause harmful
interference to radio communications. Its operation in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
EC Conformance Declaration - Class A
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2
08970 - Sant Joan Despí,
Barcelona, Spain.
This information technology equipment complies with the requirements of the Low
Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE
Mark accordingly. It conforms to the following specifications:
EMC: EN55024 (1998)/CISPR-22 (1995) Class A
IEC 61000-4-2 (1995)
IEC 61000-4-3 (1995)
IEC 61000-4-4 (1995)
IEC 61000-4-5 (1995)
IEC 61000-4-6 (1995)
IEC 61000-4-11 (1995)
C
OMPLIANCES
o a
, 4 ,
4 kV CD, 8 kV AD
3 V/m
1.0 kV - (power line)
0.5 kV - (signal line)
2 kV - (line to line)
1 kV - (line to ground)
3 Vrms
Voltage dip
Voltage interruption >95% - 5000 ms
>95% - 10 ms
30% - 500 ms
60% - 100 ms
i