802.1Q Vlan Port Configuration - SMC Networks 8606SX - annexe 1 Management Manual

U S
SIN G T HE YST EM

802.1Q VLAN Port Configuration

Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
Port PVID
---------------------------------------------------------------------
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
PVID
Acceptable Frame Type This switch accepts "All" frame types, including
Ingress Filtering
Note: This switch does not support GVRP. Therefore, the GVRP
Status parameter is set to disabled and cannot be enabled.
The other GVRP parameters will always display zeros.
2-50
C
ONFIGURATION
Tiger Switc h 100 0 SMC8 608SX
802.1Q VLAN Port Configuration : Port 1 - 8
Acceptable Ingress
Frame Type Filtering
All FALSE
All FALSE
All FALSE
All FALSE
All FALSE
All FALSE
All FALSE
All FALSE
<APPLY>
Description
The VLAN ID assigned to untagged frames
received on this port. Use the PVID to assign
ports to the same untagged VLAN.
VLAN tagged or VLAN untagged frames. Note
that all VLAN untagged frames received on this
port are assigned to th e PVID for this port.
If set to "True," incoming frames for VLANs which
do not include this port in their member set will
be discarded at the inbo und port.
P
ROGRAM
GVRP GVRP Failed
Status Registrations
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
DISABLED
<OK>
GVRP Last
PDU Origin
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
0 00-00-00-00-00-00
<CANCEL>