Pulling A Key - HandyTrac Primary Touch Key Control Installation And Operation Manual

Pulling a Key

1. Tap the "Pull Key" icon
3. Tap the unit from the list. You can use
the Search box to find units, or, if you
have buildings programmed, you can
filter with the "All buildings" drop-down.
5. If you need multiple keys, continue to
select units from the list.
2. Tap an Activity Code. Choosing an
appropriate Activity makes your audit
trail more accurate.
4. The system will electronically pop open
the door and tell you where to find the
unit key you requested. Scan the key out
to verify it is the correct tag.
6. Once you are finished pulling keys, close
the cabinet door and tap Log Out.
HandyTrac Touch
User Guide
13