Changing Apt/Unit - HandyTrac Primary Touch Key Control Installation And Operation Manual

Changing Apt/Unit# (Renaming keys)
(Master access is required)
1. Under the Administration Menu, tap on
Change Apt/Unit#.
3. Tap on the unit and type in a new name
using the on-screen keyboard.
Adding A New Unit
New units are added by replacing extra locations in the system. In general, extra locations
are named ADMIN or XTRA. To add a new unit, you must do the following in this order:
1. Rename an extra location.
2. Replace the keytag as detailed on the following page, if required.
If you need to add keys beyond what is currently in your system, it may be possible to add additional hooks
to the system with a System Expansion. Contact HandyTrac Service if you require a System Expansion.
2. You will see the full list of units and any
extra locations, if available.
4. The system will confirm the new name
has been entered.
HandyTrac Touch
User Guide
18