Pulling A Key - HandyTrac Key Control System Installation & Operating Manual

Pulling a Key

1. Tap the "Pull Key" icon
3. Tap your unit from the list. You can use
the Find Apt/Unit# box to search. If you
have buildings programmed, you can
filter with the "All buildings" drop-down.
5. If you need multiple keys, continue to
select units from the list.
HandyTrac Touch
2. Select an Activity from the drop-down
list. Choosing an accurate Activity makes
your audit trail more accurate.
4. The system will electronically pop open
the door and tell you where to find the
unit key you requested. Scan the key out
to verify it is the correct tag.
6. Once you are finished pulling keys, close
the cabinet door and tap Log Out.
User Guide
19