HandyTrac Primary Touch Key Control Installation And Operation Manual page 16

Using Building Pull
1. Log in to the Handytrac system and
select the Building Pull icon.
3. Select a building from the list. The
cabinet door will open and direct you to
the first available key in the building.
Notes:
• If a key is not in the cabinet, tap "Cancel" to skip the unit and continue the Building Pull.
• If a key is already out or if it is restricted, the unit will be skipped.
• Buildings must be programmed in the system to use Building Pull.
2. Select the Activity that will be
performed for the Building Pull.
4. Remove the key for the unit and scan
the key out. Once a key is scanned, the
system will automatically provide the
next key in the building. Continue pulling
and scanning each unit key until the
building pull is complete.
HandyTrac Touch
User Guide
16