Altair IPcom IPB-306 User Manual page 16

USAGE EXAMPLES
Configure the unit for a fixed IP address
If you do not have a DHCP server on your network, you have two options:
• Connect devices to a switch without DHCP: The ALTAIR IPCOM Series devices have a protocol
whereby if a DHCP server is not available it will auto-assign an IP. The drawback of this method is
that the time between start up of devices is much longer.
• Assign a fixed IP to the devices: To do this, you must access the NEBULA Configuration Software,
go to the "Users" window, select the desired device and access the "Advanced Settings" menu
where in the Ethernet tab you can disable the DHCP option and assign the desired fixed IP.
Note. This last option is only allowed when the network is of your own, we mean all the devices
connected has been IP assigned previously. Avoid assign same IP to more than a device or network
errors would occur, sure.
The "User" section (in the "Advanced Settings" window) allows you to name each device something
easily understandable, such as: "Audio", "Director", "Camera 1", "Lighting", etc.
ACCESSIBILITY
Quick access
Keyboard Shortcuts
To improve the user experience in the IPB-306 beltpacks, a series of "shortcuts" have been implemented to
modify certain parameters more quickly and smoothly.
• MENU key + Rotate Rotor side B: Modifies the brightness adjustment of the OLED Display.
• TALK ´s key + Rotate Rotor side B: Modifies the Microphone Gain setting.
• MENU key + Press Rotor side B: Key panel lock/unlock.
ALTAIR IPcom Series: Model IPB-306
14