Altair IPcom IPB-306 User Manual page 14

Listening volume
Each channel of the IPB-306 unit has its individual volume control and in general:
To adjust the listening volume, turn the LISTEN rotor on the side of the group you want to modify.
• Turning the LISTEN rotor clockwise will increase the volume/ counterclockwise to reduce.
• Briefly pressing the LISTEN rotor will mute/enable listening on the corresponding channel. When the
configuration of the rotors does not allow direct channel setting, it is necessary to set it using MENU
Call Attention
To make a CALL attention to all members of a group, press and hold the CALL rotor on the corresponding
side. On the display of all the devices that belong to the group, a message will be shown indicating the user
who is making the call and the group to which the call is being made.
To ensure silence in calls, the buzzer and vibrator must be disabled locally or through the NEBULA software.
On systems with many users, the CALL can be initiated automatically by following the action of pressing a
TALK key to automate recognition of the caller. This option is set from NEBULA in the USERS>ADVANCED
□
SETTINGS>GENERAL
Maybe in this scenario it is advisable to set the TALK LATCH disabled on some groups to guarantee a brief
message, leaving the system operative for additional short voice messages.
Operation: USERS>Channel Config> "choose a channel" >TALK LATCH Enabled/Disabled
Private Calls
It is possible to initiate a private conversations at any time to any of the users on the system.
To do so, find on the main MENU the PRIVATE CALL menu option and scroll across all users available.
Press ENTER to establish the private call.
Destination user must accept with ENTER or refuse the call by ESC
Finish the private call by pressing again ENTER
NOTE: Interface stations IPX-301 are no considered here for private call because it is a no operator
station.
ALTAIR IPcom Series: Model IPB-306
"Send Call when Talk key is activated"
12