Neuation iSWIX Product User Manual

When using optional attachments please flow below mentioned
recommendation
Max. Recommended Speed Table
Attachments Image Max. Fill
Microtubes Foam
75%
Attachment
Microplate Foam
75%
Attachment
Flask Rubber
250ml
Attachment
11. OPERATION
Always connect the plug to the power supply to start the
unit.
Always set the required speed and time first before doing any
mixing operation. Rotate the knob to select and set the speed
value. By default, speed will be selected every time the knob
rotates.
STANDBY, TOUCH & CONTINUOUS MODE
Placing the 3 way switch in the Standby position It
will keep the vortex mixer in an OFF state.
Press the 3 way switch up towards the "Touch " side
to enable the Touch mode. In Touch mode, vortex
action will start only when the cup head is press.
Press the 3 way switch down towards the "ON"
side to enable the Continuous mode. In
Continuous mode, the vortex action will start
automatically (without pressing cup head) at the
set speed and time.
12. MAINTENANCE & CLEANING
1. Always keep the vortex mixer & its accessories in a safe
storage location and clean periodically with moist cloth. After
cleaning, ensure that all parts are dry before re-use
2. Ensure that while cleaning the unit is not plugged in.
3. The brushless motor in the vortex mixer requires no routine
maintenance. Any required service should be performed by
authorized, qualified personnel only. Repairs performed by
unauthorized personnel may void the warranty.
4. Do not try to pull the vortex mixer with attached accessories.
5. Do not try to rotate the attachments attached to modify the
shaft body.
6. Do not use the vortex mixer & its accessories in direct sunlight
or under water.
4
13. WARRANTY STATEMENT
This product is warranted to be free from defects in material and
workmanship. Your product will be duly repaired upon prompt
As Show ON notification in compliance with the following conditions:
The Sticker
This warranty is valid only if the product is used for its intended
purpose and within the guidelines specified in this instruction
manual. This warranty does not cover damage caused by accident,
neglect, misuse, improper service, natural forces or other causes
not arising from defects in original material or workmanship. This
warranty does not cover any incidental or consequential damages,
commercial loss or any other damages from the use of this
product.
All items returned for service should be set postage prepaid in the
original packaging or other suitable carton, added to avoid
damage.
This warranty is valid only if the warranty is registered with the
supplier within 30 days from the date of purchase.
For details regarding the warranty period, please refer to the
warranty card provided with the product.
For your reference, make a note of the serial number, date of purchase and supplier here.
OFF
Serial No.
Supplier
TOUCH
14. PRODUCT DISPOSAL
In case the product is to be disposed of, the relevant legal
regulations are to be observed.
Information on the disposal of electrical and electronic devices in
the European Community
ON
The disposal of electrical devices is regulated within the European
Community by national regulations based on EU Directive
2012/19/EU on waste electrical and electronic equipment (WEEE).
According to these regulations, any devices supplied after
13.06.05 in the business to business sphere, to which this product
is assigned, may no longer be disposed off in municipal or
domestic waste. They are marked with the following symbol to
indicate this.
Accumax Lab Devices Private Limited
Plot No. 15, 16 & 32 GIDC Electronic Park SEZ, Sector 26, Gandhinagar, Gujarat, India - 382026.
Purchase Date
As disposal regulations within the EU may vary
from country to country, please contact your
supplier if necessary.
Website: www.accumaxlab.com
0204-00-0000-02-003-R4
5
iSWIX
PRODUCT USER MANUAL