Texas Instruments DS90U 949EVM Series User Manual

Hide thumbs

page of 53

/ 53
Bookmarks

Quick Links

Download this manual

DS90Ux949EVM User's Guide

User's Guide

Literature Number: SNLU169

December 2014

Need help?

Do you have a question about the DS90U 949EVM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Texas Instruments DS90U 949EVM Series

Page 1 DS90Ux949EVM User's Guide User's Guide Literature Number: SNLU169 December 2014...
Page 2 Typical Connection and Test Equipment ....................1.14 Equipment References ......................1.15 Cable References ........................Bill of Materials ......................EVM PCB Schematics ........................Board Layout .......................... Revision History Contents SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 3 1-20. ALP in Demo Mode ....................1-21. ALP Preferences Menu ................1-22. Typical Test Setup for Video Application ..................1-23. Typical Test Setup for Evaluation SNLU169 – December 2014 List of Figures Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 4 1-12. Configuration Select (MODE_SEL0) -- SW-DIP8 - S2 ..............1-13. Configuration Select (MODE_SEL1) - SW-DIP8 - S6 ......................1-14. IDx SW-DIP8 - S3 ......................2-1. Bill of Materials List of Tables SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 5 Single +12V power supply for EVM • 1.8V LVCMOS I/O interface • 1.8V or 3.3V compatible LVCMOS I C interface • Automotive grade product: AEC-Q100 Grade 2 qualified SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 6 DOUT1- Processor D3+/- 1080p60 DS90Ux949-Q1 DS90Ux948-Q1 or Graphic Serializer CLK2+/- Processor Deserializer D4+/- D5+/- D6+/- D7+/- D_GPIO D_GPIO (SPI) (SPI) Figure 1-1. Applications Diagram DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 7 (OpenLDI ) FPD-Link III Display Deserializer (I2C) Figure 1-2. Typical Configuration Figure 1-1 Figure 1-2 illustrate the use of the chipset in a display application. SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 8 KvoÇ í •Á]š Z ^KE_ š š]u KvoÇ í •Á]š Z ^KE_ š š]u KvoÇ í •Á]š Z ^KE_ š š]u on 929 EVM Figure 1-3. Interfacing to the EVM DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 9 1 to 3 ON 1 ON, 2 to 8 OFF 1 ON, 2 to 8 OFF All OFF 1 ON, 2 to 8 OFF SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 10 IN_D2+ Table 1-7. USB2ANY Connector Designator Description mini USB 5 pin Table 1-8. I2C/CCI Interface Header J20 Designator Signal J20.1 VDDI2C J20.2 J20.3 J20.4 DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 11 If available, remote EDID is copied into internal SRAM EDID. Table 1-12. Configuration Select (MODE_SEL0) -- SW-DIP8 - S2 MODE # EDID_SEL AUTO_SS AUX_I2S Only set one high. SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 12 0x0E 0x1C S1.3 0x10 0x20 S1.4 0x12 0x24 S1.5 0x14 0x28 S1.6 0x16 0x2C S1.7 0x18 0x30 S1.8 0x1A 0x34 Only set one high. DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 13 Make sure all the software has been installed and the hardware is powered on and connected to the PC. Execute “Analog LaunchPAD” shortcut from the start menu. The default start menu location is under All Programs > Texas Instruments > Analog LaunchPAD vx.x.x > Analog LaunchPAD to start MainGUI.exe. SNLU169 – December 2014...
Page 14 Under the Devices tab click on “DS90Ux949” to select the device and open up the device profile and its associated tabs. Figure 1-5. Initial ALP Screen After selecting the DS90Ux949, the following screen should appear. DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 15 Figure 1-6. Follow-up Screen 1.11.6 Information Tab The Information tab is shown below. Please note the device revision could be different. Figure 1-7. ALP Information Tab SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 16 ALP Software Setup www.ti.com 1.11.7 HDMI Tab The HDMI tab is shown below. Figure 1-8. ALP HDMI Tab DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 17 ALP Software Setup www.ti.com 1.11.8 Pattern Generator Tab The SER Pattern Generator tab is shown below. Figure 1-9. ALP Pattern Generator Tab SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 18 ALP Software Setup www.ti.com 1.11.9 Registers Tab The Registers tab is shown below. Figure 1-10. ALP Registers Tab DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 19 Address 0x00 selected as shown below. Note that the “Value:” box, , will now show the hex value of that register. Figure 1-11. ALP Device ID Selected SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 20 (indicating a “1”) or unchecking to remove the check mark (indicating a “0”). Click the “Apply” button to write to the register, and “refresh” to see the new value of the selected (highlighted) register. The box toggles on every mouse click. DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 22 Highlight the incorrect profile in the Defined ALP Devices list and press the remove button. Figure 1-15. Remove Incorrect Profile Find the correct profile under the Select a Daughter Board list, highlight the profile and press Add. DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 23 Troubleshooting ALP Software www.ti.com Figure 1-16. Add Correct Profile Select Ok and the correct profile should now be loaded. Figure 1-17. Finish Setup SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 24 When the ALP is operating in demo mode there is a “(Demo Mode)” indication in the lower left of the application status bar as shown below. DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 25 After demo mode is disabled, the ALP software will poll the ALP hardware. The ALP software will update and have only “DS90UH947” under the “Devices” pull down menu. SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 26 DIGITAL VIDEO GENERATOR VIDEO GENERATOR OpenLDI FPD-Link III Digital Video Source Logic Analyzer / Oscilloscope Contents of Demo Kit Figure 1-23. Typical Test Setup for Evaluation DS90Ux949EVM User's Guide SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 27 For optimal performance, we recommend Shielded Twisted Pair (STP) 100ohm differential impedance and 24 AWG (or larger diameter) cable for high-speed data applications. Leoni Dacar 538 series cable: www.leoni-automotive-cables.com Rosenberger HSD connector: www.rosenberger.de/en/Products/35_Automotive_HSD.php SNLU169 – December 2014 DS90Ux949EVM User's Guide Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 28 CAP, TA, 100 µF, 16 V, +/- T495D107M016ATE100 Kemet 7343-31 20%, 0.1 ohm, SMD C115 CAP, CERM, 47 µF, 16 V, GRM32ER61C476ME15L MuRata 1210 +/- 20%, X5R, 1210 Bill of Materials SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 29 14.4x11x9m Header, 100mil, 4x2, Gold, TSW-104-07-G-D Samtec 4x2 Header L1, L2, L12, L13 1.5A Ferrite Bead, 330 ohm BLM18SG331TN1D MuRata 0603 @ 100MHz, SMD SNLU169 – December 2014 Bill of Materials Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 30 R53, R62, R89 RES, 68.1 k, 1%, 0.063 W, CRCW040268K1FKED Vishay-Dale 0402 0402 R54, R63, R90 RES, 56.2 k, 1%, 0.063 W, CRCW040256K2FKED Vishay-Dale 0402 0402 Bill of Materials SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 31 0402 0402 R202 RES, 12.1 k, 1%, 0.063 W, CRCW040212K1FKED Vishay-Dale 0402 0402 R208 RES, 3.24 k, 1%, 0.063 W, CRCW04023K24FKED Vishay-Dale 0402 0402 SNLU169 – December 2014 Bill of Materials Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 32 V, +/- 10%, X7R, 0603 C22, C23, C31, C37, C48, CAP, CERM, 4.7 µF, 16 V, GRM21BR71C475KA73L MuRata 0805 C51, C52, C55 +/- 10%, X7R, 0805 Bill of Materials SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 33 NY PMS 440 0025 PH B&F Fastener Screw 40 x 1/4, Nylon, Philips Supply panhead Appendix A SNLU169 – December 2014 EVM PCB Schematics SNLU169 – December 2014 EVM PCB Schematics Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 34 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: Ryan Bailey File: SV600978A_BlockDiagram.SchDoc...
Page 35 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_DS90UB949.SchDoc...
Page 36 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_MSP430F5529.SchDoc...
Page 37 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_EXT_UC.SchDoc...
Page 38 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_CONFIG.SchDoc...
Page 39 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_CONNECTORS.SchDoc...
Page 40 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_LED.SchDoc...
Page 41 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_Audio_IF.SchDoc...
Page 42 Not in version control Assembly Variant: Sheet: warrant that this design will meet the specifications, will be suitable for your application or fit for any particular purpose, or will operate in an implementation. Texas Instruments and/or its Drawn By: File: SV600978A_Power.SchDoc...
Page 48 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. DATE REVISION NOTES December 2014 Initial release Revision History SNLU169 – December 2014 Submit Documentation Feedback Copyright © 2014, Texas Instruments Incorporated...
Page 49 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
Page 50 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 51 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】開発キットの中には技術基準適合証明を受けていないものがあります。技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。日本テキサス・インスツルメンツ株式会社東京都新宿区西新宿６丁目２４番１号西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
Page 52 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
Page 53 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.

Texas Instruments DS90U 949EVM Series User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments DS90U 949EVM Series

Summary of Contents for Texas Instruments DS90U 949EVM Series