Subscribe to Our Youtube Channel
Related Manuals for Wren Vogue 1000 WALL
Summary of Contents for Wren Vogue 1000 WALL
- Page 1 WALL/SHALLOW BASE UNIT 1000, Assembly Guide 1000 WALL 1000 SHALLOW BASE For Internal Use: FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 2 WALL/SHALLOW BASE UNIT 1000, Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED NOT to be used with CAM LOCK Page 2 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 3 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Frontal Panel B Panel C Shelf Panel E Panel A x2 Fixed Shelf x2 Loose Shelf x2 Front Panel x1 Muntin x1 Back Panel x2 End Panel (Packed Separetely) Page 3 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 4 WALL/SHALLOW BASE UNIT 1000, Assembly Guide (F) x8 (L) x8 (S) x4 (K) x4 (P) x4 (G) x8 (H) x8 Wooden 15mm 20mm 30mm 45mm Cam Lock Cam Dowel Dowel Screw Screw Screw Screw (Expanding) (T) x12 (M) x4 (Z) x10 (N) x2 Hanging Bracket Back Panel...
- Page 5 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 1. Seat dowels (F) into holes in both end panels (A) as shown. Page 5 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 6 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 2. Seat expanding cam dowels (G) into holes in both end panels (A) as shown. Page 6 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 7 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 3. Attach panels (C) to panel (A), using expanding cam dowels (G), and wooden dowels (F) in positions as shown. See Fig 1. All cam lock (H) holes are to be positioned facing the outside of the unit carcase, for ease of tightening.
- Page 8 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 5. Attach end panel (A) using expanding cam dowels (G), and wooden dowels (F) in positions as shown. Page 8 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 9 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 6. Insert cam locks (H) and hand tighten them, this will expand cam dowels (G) and tighten the unit together. Do not use power tools with cam lock (H) Page 9 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 10 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 7. Ensure the unit is square. Slide back panel clips (T) into the groove of both panels (A) & (C). The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging bracket and corner gussets to be fitted.
- Page 11 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 8. Attach hinge plates onto both end panels (A) as shown, using 2 screws already located in hinge plates. Hinge to be mounted in accordance to customer specific kitchen plan. From Top 94mm 126mm INSIDE FACE 126mm...
- Page 12 WALL/SHALLOW BASE UNIT 1000, Assembly Guide Step 9. To secure muntin post (E) in place, use pre-drilled pilot holes to align muntin as shown. Secure muntin (E) to both base panels (C) using 4 x 45mm screws (P) as shown. Page 12 For Internal Use:FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
- Page 13 WALL/SHALLOW BASE UNIT 1000, Assembly Guide WALL UNITS ONLY Step 10. Hanging brackets steps A, B & C to be carried out on both sides as shown. A. Insert hanging bracket into pre-drilled holes. B. Rotate locking lever 180 degrees. C.
- Page 14 WALL/SHALLOW BASE UNIT 1000, Assembly Guide WALL UNITS ONLY Care to be taken. Hanging procedure is necessary for a safe installation. Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Step 13.
- Page 15 WALL/SHALLOW BASE UNIT 1000, Assembly Guide WALL UNITS ONLY Step 15. Using points a, b & c adjust the unit to suit. Point a. Rotate the top screw clockwise to move the unit up. Anti-clockwise for down. Point b. Adjust the depth using centre screw. Point c.
- Page 16 WALL/SHALLOW BASE UNIT 1000, Assembly Guide SHALLOW BASE UNITS ONLY SHALLOW BASE UNITS ONLY Step 18. Secure corner gussets to the top left and right hand side of the wall unit using 4 x 15mm screws (L) per plate. Step 19. Drill a small pilot hole through the centre of the Corner Gussets.
- Page 17 WALL/SHALLOW BASE UNIT 1000, Assembly Guide SHALLOW BASE UNITS ONLY SHALLOW BASE UNITS ONLY Step 21. Screw into any adjacent units using 30mm screws (K) provided to secure to unit. Screw just to the rear of the hinge plate at the top and bottom of both sides of the unit, place cover caps (M) on the heads to conceal them.
- Page 18 WALL/SHALLOW BASE UNIT 1000, Assembly Guide HINGE ATTACHMENT AND ADJUSTMENT Step 1. Insert hinges into frontal hinge holes provided, secure hinges with Hinge dowels the 2 x screws and hinge dowels already located in the hinges. Step 2. Attach the door to unit, clip hinges onto hinge plates and click to secure.
- Page 19 WALL/SHALLOW BASE UNIT 1000, Assembly Guide For Internal Use: FI.WR.INS.036_WKIN00126_MULTI_1000_2Dr_WALL_ShallowBASE_Rev8...
Need help?
Do you have a question about the Vogue 1000 WALL and is the answer not in the manual?
Questions and answers