Aiwa NSX-MT725 Operating Instructions Manual page 32

BEiaa
&
VIDEO/AUX
*
*
I
MD
*
LINE OUT
LLi!!!
"''"
k
Refer to the operating instructions of the connected equipment
for details.
The connecting cords are not supplied. Obtain the necessary
connecting cords.
Consult your local Aiwa dealer for optional equipment.
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-inequalizer amplifier.
*.a!t...,w*smmMwMw!-mmM*Kr**wmm*M*Hwlw"m*w-*=r4w*J.%w-#
MD JACKS
This jack is recommended to connect with an MD player.
Use a cable with RCA phono plugs.
Connect the red plug to the MD R jack, and the white plug to the
MD L jack.
LINE OUT JACKS
SUB WOOFER JACK
Connect an optional powered sub woofer with built-in-amplifier
to the jack.
0000-
'
POWER
\- -- ,
.,=
WI-7
.- -,
+4, -
up
----+---~+l
I_ I
_l
J
MD
To play a equipment connected to VI DEO/AUX jacks or MD jacks
proceed as follows.
1 Press VIDEO/AUX or MD.
To Dlav the eauioment connected to VI DEO/AUX, press
VIDEO/AUX. "VIDEO appears on the display.
To ~lav the equipment connected to MD, press MD. "MD"
appears on the display.
2 Play the connected equipment.
To
change
a source name in the display
When VIDEO/AUX is pressed, "VIDEO is displayed initially. It
can be changed to "AUX or "TV.
With the power on, press POWER while pressing VIDEO/AUX.
Repeat the procedure to select one of the names.
This unit can output analog sound signal through these jacks.
To adjust the sound level of the external source
Use a cable with RCA phono plugs to connect audio equipment
When the sound level of the external source is much higher or
with LINE IN (analog input) jacks.
much lower than that of other function sources, adjust it as follows.
Connect the red plug of a cable to LINE OUT R jack, and the
1 Press VIDEO/AUX or MD and play the equipment.
white plug to LINE OUT L jack.
2 Presss ++ or FE so that the sound level becomes the same
as that of other function sources.
m
Do not connect an equipment to LINE OUT jacks and VIDEO/
m"
AUX jacks simultaneously. Otherwise, noise is generated and
During recording, the sound level can not be adjusted.
malfunction occurs.
#8mmBm&-vEB-M-- .$WW7-P 8mAwm.mfl@abmaNe&fi@n
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack, Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
32
ENGLISH