Aiwa NSX-MT725 Operating Instructions Manual page 12

To change the volume level of the rhythm pattern
1 Press RHYTHM repeatedly until the display reads
"LEVEL X."
2 Turn MULTI JOG.
Three levels, 1-3, are available.
To
stop the BEAT function
Press BEAT ON/OFF.
BEAT toggles between On and Off.
When you interrupt or stop the playback of the sound source,
the BEAT function is automatically switched off.
12
ENGLISH
Using the AUTO mode
The AUTO mode automatically adjusts the tempo of the current
rhythm pattern so it coincides with the tempo of the music.
Depending on the music the AUTO mode may not work correctly
(with songs whose tempo is fuzzy, or is varying, for example).
2,4
2,3
II '-'k
[
1
------ . .,. ,——
-t,
H
You can let the music start playing before performing step 1 or
later at the desired moment.
1
2
3
4
Press BEAT ON/OFF to switch the function on,
You will hear the current rhythm pattern.
Change the rhythm pattern and the level setting
as required by pressing RHYTHM and turning
MULTI JOG,
Press RHYTHM to switch the display to read
"MANUAL" or "AUTO."
Turn MULTI JOG to the right to change the display
to "AUTO."
If "AUTO" is displayed in step 3, turn MULTI JOG to the left to
change the display to "MANUAL' befor performing step 4.
On switching from MANUAL over to AUTO the level of the
rhythm pattern is automatically reduced to"1 ."The preset level
will be resumed when the unit takes on the tempo of the music.
While the unit is trying to get synced up to the tempo of the
music, a cascade-like blue indicator will flash on the sides of
the graphic equalizer display section.
When the unit gets synced up to the tempo of the music, the
display will momentarily read the synced-up tempo.
Depending on sound sources (such as, songs whose tempo
is varying), however, you may see different tempos appearing
one after the other in the display.