Digital Control DIGITRAK FALCON F2+ User Manual page 60

Before assigning the Down band, pair the Up band to the
transmitter. Otherwise, rescanning will erase the current
frequencies.
STEP 8 OF 10
Move to the other location
with high noise, return to
Frequency Optimization,
and scan again.
STEP 9 OF 10
Toggle to the lowest band, click to select, then click again to assign it as the
Down band.
STEP 10 OF 10
Select Pair to pair and select
power level for the Down
band before proceeding to
calibration as you normally
would when pairing both
bands at one location.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
60