Digital Control DIGITRAK FALCON F2+ User Manual page 30

The "Li/3V Only" warning appears if you are not using the
recommended Lithium rechargeable or SuperCell battery and
have selected a High power mode.
If you are using a V1 transmitter, a warning reminds you that it
only uses Standard power mode.
STEP 6 OF 6
To pair any other time, from
the Main menu select
Transmitter selection.
Frequency optimization, and
continue.
CALIBRATE INTRO
Calibration is required anytime you perform a new frequency scan with
power change or change any of the following:
Transmitter
Power mode of the transmitter
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
30