Digital Control DIGITRAK FALCON F2+ User Manual page 29

STEP 3 OF 6
Align the transmitter so its IR port is near and facing the round IR port on the
front of the locator.
The Falcon locators with programmable power mode ignore the
V2 Power Mode selection method described on the transmitter
sticker and use the locator-specified power level.
STEP 4 OF 6
Select Transmitter pairing
request.
Do not move the transmitter until you hear the beep and see a
checkmark.
STEP 5 OF 6
After successful pairing, click to calibrate.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
29