Digital Control DIGITRAK FALCON F2+ User Manual page 56

STEP 2 OF 7
The number on the screen
*
shows the last target
depth set. If it matches
your desired target depth,
select the checkmark.
STEP 3 OF 7
To change the target depth
shown, use the keypad.
If TrakStand HAG is enabled, but drilling shallower than 0.5 m,
adjust the TrakStand HAG height.
If using standard HAG and holding the locator to distance from
rebar or drilling shallower than 0.5 m, add the height to the
target depth since standard HAG is ignored for Target Steering.
STEP 4 OF 7
Place the locator on the drill path with its battery compartment facing the drill
head. Target Steering guides the transmitter to be inline with the locator's
handle when it reaches the target beneath the locator. For accurate depth
information, use the horizontal distance reading on the Target Steering
display to ensure the locator is no more than 10.7 m in front of the
transmitter.
If you go shallower than 10.7 m do not rely on the depth and
up/down steering information. Instead, monitor pitch data.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
56