Digital Control DIGITRAK FALCON F2+ User Manual page 24

STEP 7 OF 8
Click Transmitter pairing
request.
Do not move the transmitter until you hear four beeps and a
check mark appears.
STEP 8 OF 8
Confirm the pairing and power mode, and then click to continue to
Calibration.
ADVANCED FO - SCAN
STEP 1 OF 7
Before You Start
Scan Pick Pair allows you to scan the bore path for noise and then select the
lowest noise bands identified by the locator or manually.
You may decide to continue to use the currently selected bands or to select
bands manually if you know you need a specific band, such as a low-
frequency band (7 or 11) to account for rebar or other interference.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
24