Digital Control DIGITRAK FALCON F2+ User Manual page 23

To change the pre-set bands and power levels, click the Quick
Scan/Pair option (the gear icon).
STEP 5 OF 8
Insert batter(ies) positive terminal first and install the battery cap to power on
the transmitter.
STEP 6 OF 8
Align the transmitter so its IR port is near and facing the round IR port on the
front of the locator.
Falcon locators with programmable power mode override any
other selection method when used with a V2 transmitter.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
23