Digital Control DIGITRAK FALCON F2+ User Manual page 32

STEP 3 OF 6
Select Continue to calibrate
the Active band. If you are
pairing both bands, the Up
band is paired first.
STEP 4 OF 6
The locator beeps 3 times
fast and displays a check
mark after a successful
calibration.
STEP 5 OF 6
Use the Above Ground Range (AGR) that displays next to check the accuracy
of your calibration. Move the locator to at least two different distances 1.5m
and 4.8m and verify distance readings match the measurement.
The locator assumes the transmitter pitch equals zero during
the above ground range check. For accurate readings ensure the
transmitter is approximately level.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
32