Digital Control DIGITRAK FALCON F2+ User Manual page 38

1. Disable HAG
2. Enable standard HAG
3. Enable TrakStand HAG
4. Set HAG
5. Cancel
The locator must be held at this height for accurate depth
readings and is ignored during Target Steering.
STEP 4 OF 4
To enable TrakStand HAG,
select Enable TrakStand.
The height is preset to
0.46m. This is the height
of a TrakStand with legs
fully extended.
The height of a
Trakstand with legs fully
collapsed is 0.60m.
Changing the TrakStand height is not recommended. If the
height needs to be changed, return to the Enable HAG screen,
then select Set HAG to enter a new height.
The locator must be in the TrakStand at the set height for
accurate depth readings.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
38