Digital Control DIGITRAK FALCON F2+ User Manual page 17

STEP 2 OF 3
Your transmitter comes with
one battery contact spring
and one battery cap tool.
STEP 3 OF 3
Insert batteries positive terminal first. Install one spring between C-cell
batteries to help prevent chatter.
If you are using the Falcon Transmitter Adapter (FTA) with a battery, install
Lithium Rechargeable (LiR) battery into the adapter positive terminal first. For
more information on the FTA, see "Falcon Transmitter Adapter for V2
MultiPower "Blue" Transmitters" in the Advanced Topics chapter.
Alkaline batteries are not sufficient for High Power Mode. The
locator will display a warning.
Do not use a spring with a SuperCell, LiR, or FTA.
The transmitter is powered once batteries are inserted and the cap is
installed.
SET HEIGHT-ABOVE-GROUND (STANDARD)
STEP 1 OF 5
Stuff You Should Know
DIGITAL CONTROL, INC
DIGITRAK FALCON F2+
DCI DigiGuide
USER MANUAL
05.18.2024
17