turck REM Series Instructions For Use Manual
Encoders with analog output
Hide thumbs
Also See for REM Series:
- Instructions for use manual (45 pages) ,
- Instructions for use manual (45 pages) ,
- Instructions for use manual (20 pages)
Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for turck REM Series
Summary of Contents for turck REM Series
- Page 1 REM…|RES… Encoders with Analog Output Instructions for Use...
- Page 2 12 Repair .............................. 18 12.1 Returning devices ...................... 18 13 Disposal.............................. 18 14 Turck branches — contact data .................... 19 V02.00 | 2024/04 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 3 If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V02.00 | 2024/04 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 4 The delivery consists of the following: Encoder – sensor Quick Start Guide Turck service Turck supports you in your projects – from the initial analysis right through to the commission- ing of your application. The Turck product database at www.turck.com offers you several soft- ware tools for programming, configuring or commissioning, as well as data sheets and CAD files in many export formats.
- Page 5 The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following safety instructions and warnings in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these safety instructions.
- Page 6 Incremental encoders only detect position changes when active by counting peri- odic patterns. This normally involves the optical scanning of a rotating disk. V02.00 | 2024/04 | 6 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 7 Fig. 3: Output function – CW version Fig. 4: Output function – CCW version (Example: multiturn, current output) (Example: multiturn, current output) V02.00 | 2024/04 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 8 LABS free; cULus approved; RoHS compliant; IP67 protec- tion; other cable lengths and types available, www.turck.com V02.00 | 2024/04 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 9 Fig. 8: Mounting view — do not rigidly connect use a hammer to align the device the device to shafts and flanges at the same time V02.00 | 2024/04 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 10 Secure the coupling on the device using tensioning screws or clamping screws. For the maximum tightening torque, refer to the data sheet of the screws used. V02.00 | 2024/04 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 11 Fig. 13: Screwing the female connector to the drive flange „ Tighten the clamping hub by hand. Fig. 14: Tightening the clamping hub V02.00 | 2024/04 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 12 Fig. 15: Wiring diagram – current output Wiring diagram – voltage output n.c. n.c. – Fig. 16: Wiring diagram – voltage output V02.00 | 2024/04 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 13 Commissioning Commissioning After connecting and switching on the power supply, the device is automatically ready for operation. V02.00 | 2024/04 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 14 Connection to the controller is interrupted. Check wiring. Device is not ready for operation. Faulty power supply. Check power supply and wiring. V02.00 | 2024/04 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 15 Green flashing × 3 End point is set Red flashing × 3 Error during the teach-in process Green/red/green flashing The measuring range has been reset V02.00 | 2024/04 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 16 Teach point 1 Teach point 2 Fig. 19: Teach-in without limit switch function Fig. 20: Teach-in with limit switch function (current output) (current output) V02.00 | 2024/04 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 17 If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V02.00 | 2024/04 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 18 Disposal The devices must be disposed of properly and do not belong in the domestic waste. V02.00 | 2024/04 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 19 Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V02.00 | 2024/04 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 20 United Kingdom TURCK BANNER LIMITED Blenheim House, Hurricane Way, GB-SS11 8YT Wickford, Essex www.turckbanner.co.uk Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V02.00 | 2024/04 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 21 Over 30 subsidiaries and 60 representations worldwide! 100009120 | 2024/04 100009120 www.turck.com...
Need help?
Do you have a question about the REM Series and is the answer not in the manual?
Questions and answers