turck REM Series Instructions For Use Manual
Encoders with io-link interface
Hide thumbs
Also See for REM Series:
- Instructions for use manual (45 pages) ,
- Instructions for use manual (21 pages) ,
- Instructions for use manual (20 pages)
Subscribe to Our Youtube Channel
Related Manuals for turck REM Series
Summary of Contents for turck REM Series
- Page 1 Your Global Automation Partner REM…|RES… Encoders with IO-Link Interface Instructions for Use...
-
Page 2: Table Of Contents
11 Maintenance ............................. 19 12 Repair .............................. 19 12.1 Returning devices ...................... 19 13 Disposal.............................. 19 14 Turck subsidiaries — contact information.................. 20 V03.00 | 2022/12 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 3: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V03.00 | 2022/12 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 4: Notes On The Product
The scope of delivery includes: Encoder – sensor Quick Start Guide Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 5: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 6: Product Description
The devices can be operated in IO-Link mode. The devices must be connected to an IO-Link master for operation in IO-Link mode. Different device functions can be configured via the IO-Link interface. V03.00 | 2022/12 | 6 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 7: Io-Link Mode
2 m, jacket material: PVC, black; cULus ø 15 M12 x 1 approval; other cable lengths and types available, see www.turck.com 11.5 V03.00 | 2022/12 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 8: Installing
Fig. 6: Mounting view — do not rigidly connect use a hammer to align the device the device to shafts and flanges at the same time V03.00 | 2022/12 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Mounting The Solid Shaft Encoder Using A Coupling
Secure the coupling on the device using tensioning screws or clamping screws. For the maximum tightening torque, refer to the data sheet of the screws used. V03.00 | 2022/12 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Mounting The Hollow Shaft Encoder Using A Coupling
Screw the coupling to the drive flange. Fig. 11: Screwing the coupling to the drive flange „ Carefully tighten the clamping hub. Fig. 12: Tightening the clamping hub V03.00 | 2022/12 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Connection
Wiring diagram IO-Link n. c. – Fig. 13: REM…|RES…-IO-Link – wiring diagram V03.00 | 2022/12 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Commissioning
Commissioning Commissioning After connecting and switching on the power supply, the device is automatically ready for operation. V03.00 | 2022/12 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Operation
A firmware download is executed. green Device is faulty Red flashing An IO-Link error has occurred. Flashing 1 × red IO-Link warning is displayed. V03.00 | 2022/12 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Setting
(switch off parameter server function) Rotation direction Clockwise Counter clockwise Set zero point and reset multiturn Multiturn reset Reset to factory setting Application-specific marking V03.00 | 2022/12 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 15 The maximum possible TMR is calculated as follows: 3600 × 2 ≤ 4294967296 (2 Maximum possible TMR: 3600 × 2 = 943718400 V03.00 | 2022/12 | 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 16 0 after 1000 revolutions. If the Endless shaft control paramter is activated, the number of revolutions can be defined precisely. The TMR is calculated as follows: 360 × (1000/1) = 360000 V03.00 | 2022/12 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
-
Page 17: Setting Via Fdt/Iodd
USB-2-IOL-002 IO-Link adapter. Further information on setting the devices via IODD with a configuration tool is provided in the IO-Link commissioning manual. V03.00 | 2022/12 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V03.00 | 2022/12 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 19: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 12.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 20: Turck Subsidiaries - Contact Information
Baner-Balewadi Link Rd., 411045 Pune - Maharashtra www.turck.co.in Italy TURCK BANNER S.R.L. Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it V03.00 | 2022/12 | 20 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 21 Inönü mah. Kayisdagi c., Yesil Konak Evleri No: 178, A Blok D:4, 34755 Kadiköy/ Istanbul www.turck.com.tr Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V03.00 | 2022/12 | 21 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 22 Over 30 subsidiaries and 60 representations worldwide! 100021375 | 2022/12 100021375 www.turck.com...
Need help?
Do you have a question about the REM Series and is the answer not in the manual?
Questions and answers