turck RES Series Instructions For Use Manual
Encoders with ssi interface
Hide thumbs
Also See for RES Series:
- Instructions for use manual (45 pages) ,
- Instructions for use manual (22 pages) ,
- Instructions for use manual (21 pages)
Subscribe to Our Youtube Channel
Related Manuals for turck RES Series
Summary of Contents for turck RES Series
- Page 1 Your Global Automation Partner REM…|RES… Encoders with SSI Interface Instructions for Use...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Wiring diagram ...................... 13 Commissioning .......................... 14 Setting .............................. 15 Zero setting ........................ 15 Setting the rotation direction .................. 15 Deactivating unused inputs .................. 15 Troubleshooting .......................... 16 10 Maintenance............................ 17 11 Repair.............................. 17 11.1 Returning devices...................... 17 12 Disposal .............................. 17 13 Turck Subsidiaries - Contact Information .................. 18 V02.00 | 2021/04... - Page 4 Contents Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document the following material can be found on the Internet at www.turck.com: Data sheet Quick Start Guide Feedback about these instructions We make every effort to ensure that these instructions are as informative and as clear as possible. -
Page 6: Information About The Product
CAD files in numerous export formats. The contact details of Turck subsidiaries worldwide can be found on p. [} 18]. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 8: Product Description
HIGH signal. The response time of the inputs is 1 ms. The write cycles for the SET input are limited to 10,000. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: Technical Accessories
Technical accessories Dimension drawing Type Ident-No. Description E-RKC 8T-264-2 U-04781 Connection cable, female M12, straight, 8-pin, cable length 2 m, sheath material: PVC, black; M12 x 1 ø 15 other cable lengths and variants available, see www.turck.com V02.00 | 2021/04... -
Page 10: Installing
Fig. 6: Mounting view – do not rigidly connect use a hammer to align the device the device to shafts and flanges at the same time Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 11: Mounting The Solid Shaft Encoder Using A Coupling
Mounting the solid shaft encoder using a coupling „ Check shaft for displacement. „ Refer to the technical data for the coupling for the maximum axial displacement, radial displacement, and angular displacement values. Fig. 7: Axial displacement Fig. 8: Radial displacement α Fig. 9: Angular displacement „... -
Page 12: Mounting The Hollow Shaft Encoder Using A Coupling
Screw the coupling to the drive flange. Fig. 11: Screwing the coupling to the drive flange „ Carefully tighten the clamping hub. Fig. 12: Tightening the clamping hub Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 13: Connection
Device damage possible „ Only connect the device when it is in a de-energized state. Turck recommends the following cable lengths: For asymmetrical transmission (no inverted signals): max. 10 m For symmetrical transmission (e.g. RS422 standard): max. 50 m with twisted pairs „... -
Page 14: Commissioning
Commissioning The device is operational automatically 150 ms after the connection is made and the power supply is switched on. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 15: Setting
Setting Zero setting NOTE Only set the zero point when the device is at a standstill. „ Put the application with the installed encoder in the required position. „ Send a HIGH signal to the SET input for at least 10 ms. The HIGH signal must be at least 60 % of the supply voltage. -
Page 16: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 17: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 11.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 18: Turck Subsidiaries - Contact Information
Turck Banner Malaysia Sdn Bhd Unit A-23A-08, Tower A, Pinnacle Petaling Jaya, Jalan Utara C, 46200 Petaling Jaya Selangor www.turckbanner.my Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 19 Mexico Turck Comercial, S. de RL de CV Blvd. Campestre No. 100, Parque Industrial SERVER, C.P. 25350 Arteaga, Coahuila www.turck.com.mx Netherlands Turck B. V. Postbus 297, NL-8000 AG Zwolle www.turck.nl Austria Turck GmbH Graumanngasse 7/A5-1, A-1150 Wien www.turck.at Poland TURCK sp.z.o.o.
- Page 20 Over 30 subsidiaries and over 60 representations worldwide! 100009124 | 2021/04 100009124 www.turck.com...
Need help?
Do you have a question about the RES Series and is the answer not in the manual?
Questions and answers