Changing The Rear Light Bulb - APRILIA RSV MILLE - REGULAR SERVICE Manual

Carefully read p. 92 (BULBS).
NOTE
The rear light houses two parking
light/stoplight bulbs (1).
The following operations refer to a single
bulb, but are valid for both.
Before changing a bulb, check the efficien-
cy of the stoplight switches, see p. 89
(CHECKING THE SWITCHES).
N
Unscrew and remove the two screws (2).
N
Remove the protection screen (3).
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
Tighten the screw (2) carefully, without ex-
erting too much pressure, in order to avoid
damaging the protection screen.
N
Press the bulb (1) slightly and rotate it
anticlockwise.
N
Extract the bulb (1) from its seat.
CAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
N
Correctly install a new bulb of the same
type.
NOTE
During transport, the vehicle must
be kept in vertical position, it must be firmly
anchored and the 1st gear must be en-
gaged, in order to avoid any leak of fuel,
oil, coolant.
CAUTION
In case of failure, do not tow the vehicle,
but ask for assistance.
use and maintenance RSV mille - RSV mille R
95