Lubricant Chart - APRILIA RSV MILLE - REGULAR SERVICE Manual

Engine oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance with or superior to the
CCMC G-4, A.P.I. SG. specifications.
W
Fork oil (recommended):
If you need an oil with intermediate characteristics in comparison with the
FORK 20W, these can be mixed as indicated below:
SAE 10W F.A. 5W 67% of the volume, +
FORK 5W 67% of the volume +
SAE 15W F.A. 5W 33% of the volume, +
FORK 5W 33% of the volume +
w W
"R" ( ) fork oil: OHLINS 10W
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature range -30°C.... +140°C,
dripping point 150°C... 230°C, high protection against corrosion, good resistance to water and oxidation.
Protection of the battery poles: neutral grease or vaseline.
Spray grease for chains (recommended):
Brake fluid (recommended):
WARNING
@
Use new brake fluid only.
Clutch fluid (recommended):
WARNING
Use new clutch fluid only.
Engine coolant (recommended):
WARNING
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
EXTRA RAID 4, SAE 15W - 50 or
F.A. 5W or F.A. 20W; as an alternative
F.A. 20W 33% of the volume or
FORK 20W 33% of the volume.
F.A. 20W 67% of the volume or
FORK 20W 67% of the volume.
CHAIN SPRAY or
F.F., DOT 5 (DOT 4 compatible) or
IP F.F., DOT 5 (compatible with DOT 4) or
ECOBLU –40°C or
TEC 4T, SAE 15 W - 50.
FORK 5W or
F.A. 5W and
AUTOGREASE MP or
CHAIN LUBE.
BRAKE 5.1, DOT 5 (compatible DOT 4).
BRAKE 5.1, DOT 5 (compatible DOT 4)
COOL.
FORK 20 .
F.A. 20W or FORK 5W and
GREASE 30.
use and maintenance RSV mille - RSV mille R
103