Table of Contents
Advertisement
CAUTION
If the vehicle remains unused for more
than twenty days, disconnect the 30A
fuses, in order to avoid the deterioration
of the battery caused by the current
consumption due to the multifunction
computer.
NOTE
The removal of the 30A fuses re-
quires the setting to zero of the following
functions: digital clock and red line setting.
To reset these functions, see p. 20 (MUL-
TIFUNCTION COMPUTER).
If the vehicle remains unused for more
than fifteen days, it is necessary to re-
charge the battery, in order to prevent its
sulphation, see p. 88 (RECHARGING THE
BATTERY).
N
Remove the battery, see p. 87 (REMOV-
ING THE BATTERY) and put it in a cool
and dry place.
It is important to check the charge periodi-
cally (about once a month), during the win-
ter or when the vehicle remains unused, in
order to prevent the deterioration of the
battery.
N
Recharge it completely with a normal
charge, see p. 88 (RECHARGING THE
BATTERY).
If the battery remains on the vehicle, dis-
connect the cables from the terminals.
Carefully read p. 55 (MAINTENANCE).
The vehicle is provided with four switches:
1) Stoplight switch on the rear brake con-
trol lever;
2) Stoplight switch on the front brake con-
trol lever;
3) Safety switch on the side stand;
4) Switch on the clutch control lever.
N
Make sure that there are no dirt or mud
deposits on the switch; the pin must be
able to move without interferences, re-
turning automatically to its initial position.
N
Make sure that the cables are connected
correctly.
N
Check the spring (5): it must not be dam-
aged, worn or weakened.
use and maintenance RSV mille - RSV mille R
89
Hide quick links:
Advertisement
Table of Contents
