Changing The Rear Light Bulb - APRILIA RSV MILLE - PART 2 2000 Manual

Carefully read p. 101 (BULBS).
NOTE
The rear light houses two parking
light/stoplight bulbs (1).
The following operations refer to a single
bulb, but are valid for both.
Before changing a bulb, check the efficien-
cy of the stoplight switches, see p. 97
(CHECKING THE SWITCHES).
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
Unscrew and remove the two screws (2).
Remove the protection screen (3).
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
Tighten the screw (2) carefully, without ex-
erting too much pressure, in order to avoid
damaging the protection screen.
Press the bulb (1) slightly and rotate it
anticlockwise.
Extract the bulb (1) from its seat.
CAUTION
Insert the bulb in the bulb socket, mak-
ing the two bulb pins coincide with the
relevant guides on the socket.
Correctly install a new bulb of the same
type.
use and maintenance RSV mille - RSV mille R 105