Withdraw the cable (9) completely.
Put back the fuel tank, see p. 76 (LIFT-
ING THE FUEL TANK).
Put back the left side cover, see p. 78
(REMOVING THE SIDE COVERS).
NOTE
Support the stand, in order to pre-
vent it from accidentally falling down.
Unscrew and remove the screws (11)
and take the washers (12).
Remove the stand (1) complete with:
– springs (2);
– support (3);
– safety switch (4).
9
NOTE
together: complete stand, screws (11) and
washers (12), in order to be able to install
them correctly when the vehicle must be
used on roads.
Put back the lower fairing (and the two
side fairings), see p.77 (REMOVING
THE LOWER FAIRING).
12
12
11
Store the following components
11
3
4
11
use and maintenance RSV mille - RSV mille R
12
1
2
81