Integrated Devices Screen - Dell POWEREDGE 1950 Hardware Owner's Manual

Integrated Devices Screen

Table 2-4 lists the options and descriptions for the information fields that appear on the Integrated Devices
screen.
Table 2-4. Integrated Devices Screen Options
Option
Integrated SAS Controller
(Enabled default)
Embedded SATA
Controller
(Off default)
IDE CD-ROM Controller
(Auto default)
User-Accessible USB Ports
(All Ports On default)
Embedded Gb NIC1
(Enabled with PXE
default)
MAC Address
TOE Capability
Embedded Gb NIC2
(Enabled without PXE
default)
MAC Address
TOE Capability
36
Using the System Setup Program
Description
Enables or disables the integrated SAS controller.
Allows the integrated SATA controller to be set to Off or ATA mode.
Enables the integrated IDE controller. When set to Auto, each channel of the integrated
IDE controller is enabled if IDE devices are attached to the channel and an external IDE
controller is not detected.
NOTE:
This CD-ROM option will not appear on this menu screen if your system
does not include this optional device.
Enables or disables the system's user-accessible ports. Options are All Ports On,
Only Back Ports On, or All Ports Off. Disabling the USB ports makes system
resources available for other devices.
Enables or disables the system's integrated NIC1. Options are Enabled without PXE,
Enabled with PXE, and Disabled. PXE support allows the system to boot from the
network. Changes take effect after the system reboots.
Displays the MAC address for NIC1. This field does not have user-selectable settings.
Displays the TCP/IP Offload Engine (TOE) feature status of NIC1.
Enables or disables the system's integrated NIC2. Options are Enabled without PXE,
Enabled with PXE, and Disabled. PXE support allows the system to boot from the
network. Changes take effect after the system reboots.
Displays the MAC address for NIC2. This field does not have user-selectable settings.
Displays the TCP/IP Offload Engine (TOE) feature status of NIC2.