Removing An Expansion Card - Dell POWEREDGE 1950 Hardware Owner's Manual

Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated.
b
When the card is seated in the connector, close the expansion-card latch. See Figure 3-12.
c
Figure 3-12. Installing an Expansion Card
2
1
5
1 PCI riser
4 expansion card
6 Connect any cables to the expansion card.
See the documentation that came with the card for information about its cable connections.
7 Close the system. See "Opening and Closing the System" on page 46.

Removing an Expansion Card

CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical
outlet.
2 Open the system. See "Opening and Closing the System" on page 46.
3 Disconnect all cables from the card.
62
Installing System Components
3
4
2 expansion-card connector
5 card-edge connector
3 expansion-card latch