Table 1-3. Hard-Drive Indicator Patterns for RAID
Condition
Identify drive/preparing for removal
Drive ready for insertion or removal
Drive predicted failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
Back-Panel Features and Indicators
Figure 1-3 shows the controls, indicators, and connectors located on the system's back panel.
Figure 1-3. Back-Panel Features and Indicators
1
2
1
remote access controller
(optional)
4
USB connectors (2)
7
power supply 1
1
system identification button
0
1
center PCI expansion slot
3
(slot 1)
14
About Your System
Drive-Status Indicator Pattern
Blinks green two times per second.
Off
Blinks green, amber, and off.
Blinks amber four times per second.
Blinks green slowly.
Steady green.
Blinks green three seconds, amber three seconds, and off six seconds.
3
4
5
12
13
2
serial connector
5
NIC1 connector
8
power supply 2 (optional)
11
system status indicator
connector
6
9
10
11
3
6
9
12
7
8
video connector
NIC2 connector
system status indicator
left PCI expansion slot (slot 2)