Integrated Devices - Dell OptiPlex 5090 Small Form Factor Service Manual

Table 15. Boot Configuration: (continued)
Options
Enable Custom Mode
Custom Mode Key Management

Integrated Devices

This section provides Integrated Devices details and settings.
Table 16. Integrated Devices
Options
Date/Time
Date
Time
Audio
Enable Audio
Serial Port
USB Configuration
Front USB Configuration
Description
This section contains a toggle switch that allows the user to
enable or disable Custom Mode. This mode allows the PK,
KEK, db and dbx security key databases to be manipulated.
(OFF by default)
This section helps the user to select the Key Database to
allow modification. The options available are as below:
● PK (Selected by default)
● KEK
● db
● dbx
Description
This section allows the user to change the date which takes
effect immediately. The format used is MM/DD/YYYY.
This section allows the user to change the time which takes
effect immediately. The format used is HH/MM/SS in 24 hour
format. The user also has an option to switch between 12-
hours or 24-hours clock.
This section contains a toggle switch that allows the user to
enable or disable the audio on the computer. It also allows the
user to:
● Enable Microphone (Enabled by default.)
This section allows the user to set the Serial Port
Configuration:
● Disabled
● COM1: Port is configured at 3F8h with IRQ4 (Selected by
default)
● COM2: Port is configured at F28h with IRQ3
● COM3: Port is configured with 2E8h with IRQ4
This section helps the user to make changes to the USB
settings on the computer. The options available are as
follows(All options are enabled by default):
● Enable Front USB Ports
● Enable Rear USB Ports
● Enable USB Boot Support
This section allows the user to manually enable the 4 USB
ports on the front bezel (All USB ports are enabled by
default.). The options are:
● Front Port 1 (Bottom Left)
● Front Port 2 (Bottom Right)
System setup 73