Network Settings Screen Details; Integrated Devices Screen Details - Dell Precision 7920 Rack Owner's Manual

Network settings screen details

You can use the Network Settings screen to set the Boot mode from UEFI. It also allows you to specify the boot order.
You can view the Network Settings screen by clicking System Setup Main Menu > System BIOS > Network Settings.
The Network Settings screen details are explained as follows:
Menu Item Description
UEFI PXE settings This field controls the system network settings.
PXE Device1 This field controls the system network settings. Option is set to Enabled.
PXE Device2 This field controls the system network settings. Option is set to Disabled
PXE Device3 This field controls the system network settings. Option is set to Disabled
PXE Device4 This field controls the system network settings. Option is set to Disabled
PXE Device1 NIC interface used for this PXE device. Option is set to Enabled
Settings
Interface NIC interface used for this PXE device. Options are:
Intergrated NIC Port 1 Partition 1
Intergrated NIC Port 2 Partition 1
Intergrated NIC Port 3 Partition 1
Intergrated NIC Port 4 Partition 1
Protocol This field controls the PXE protocol used for PXE device. Options are IPv4 (set default) and IPv6
VLAN Enables or disables PXE device. Options are Enabled and Disabled (set default)
VLAN ID
Displays the VLAN ID
VLAN Priority Displays the VLAN Priority
UEFI HTTP This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
Settings
HTTP Device1 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device2 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device3 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device4 This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
UEFI ISCSI This field specifies the name of the ISCSI initiator (iqn format).
Settigns
ISCSI Initiator This field specifies the name of the ISCSI initiator (iqn format).
Name
ISCSI Device1 This field controls the configuration for ISCSI device.

Integrated devices screen details

You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
You can view the Integrated Devices screen by clicking System Setup Main Menu > System BIOS > Integrated Devices.
104 BIOS and UEFI