Changing The Front And Rear Direction Indicators; Changing The Rear Light Bulb - APRILIA ETX 125 - 1998 Manual

CHANGING THE FRONT AND REAR
DIRECTION INDICATORS
Carefully read p. 61 (BULBS).
c
Before changing a bulb, check
the fuses, see p. 58 (CHANGING
THE FUSES).
Unscrew and remove the screw (1).
a
Upon reassembly, tighten the
s c r e w ( 1 ) c a r e f u l l y
moderately, in order not to
damage the protection screen.
Remove the protection screen (2).
Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb from its seat.
64 use and maintenance ETX 125
c
I n s e r t t h e b u l b i n t h e b u l b
socket, making the two pins co-
incide with the relevant guides on the
bulb socket.
Correctly install a new bulb of the same
type.
CHANGING THE REAR LIGHT
BULB
c
a n d
Before changing a bulb, check
the fuses, see p. 58 (CHANGING
THE FUSES) and the efficiency of the
stoplight switches, see p. 60 (CHECK-
ING THE SWITCHES).
Carefully read p. 61 (BULBS).
Unscrew and remove the two screws (4).
a
Upon reassembly, tighten the
two screws (4) carefully and
moderately, in order not to
damage the protection screen.
Remove the protection screen (5).
Press the bulb (6) slightly and rotate it
anticlockwise.
Extract the bulb from its seat.
c
I n s e r t t h e b u l b i n t h e b u l b
socket, making the two pins
coincide with the relevant guides on
the bulb socket.
Correctly install a new bulb of the same
type.