Main Independent Controls; Controls On The Left Side Of The Handlebar - APRILIA ETX 125 - 1998 Manual

MAIN INDEPENDENT CONTROLS

CONTROLS ON THE LEFT SIDE OF THE HANDLEBAR

c
The electrical parts work only when the ignition
switch is in position "
1) HIGH BEAM SIGNALLING PUSH BUTTON (
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
2) COLD START LEVER (
The starter for the cold start of the engine is operated by
e
rotating the lever " " anticlockwise (Pos. A) .
To disconnect the starter, return the lever "
position.
16 use and maintenance ETX 125
n
".
a
)
e
)
e
" to its initial
c
3) HEADLIGHT SWITCH (
Before operating the light switch, make sure that
the dimmer switch (
When the light switch is in position "
When the switch is in position "
the dashboard light are on.
When the switch is in position "
dashboard light and the low or high beam are on.
By means of the dimmer switch (
operate the low or high beam.
4) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
5) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
b
6) DIMMER SWITCH ( -
o
When the light switch (
dimmer switch is in position "
b
while if it is in position "
o p
•
- - )
b a
- ) (6) is in position "
•
", the lights are off.
p
", the parking lights and
o
", the parking lights, the
b a
- ) (6) it is possible to
c
)
f
)
a
)
p o
•
- - ) (3) is in position "
a
", the high beam comes on,
", the low beam comes on.
b
".
", if the