Configuring Address Mapping - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
LABEL
End Port No. Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field above
and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the Start Port No. field above.
IP Address Enter your server IP address in this field.
Save Click Save to save your changes back to the Prestige.
Cancel Click Cancel to return to the previous configuration.
7.6

Configuring Address Mapping

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a
rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up
by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set
and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if
you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and
6.
To change your Prestige's address mapping settings, click NAT, Select Full Feature and click Edit Details
to open the following screen.
7-10
Table 7-5 Edit SUA/NAT Server Set
DESCRIPTION
NAT