Figure 30-4 Menu 3.2 Tcp/Ip And Dhcp Ethernet Setup; Figure 30-5 Menu 11.3 Remote Node Network Layer Options - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Edit IP Alias= No
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as appropriate. You
can cascade up to four policy sets by typing their numbers separated by commas.
IP Options:
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies= 2,4,7,9
Press ENTER to Confirm or ESC to Cancel:

Figure 30-5 Menu 11.3 Remote Node Network Layer Options

30-6
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 30-4 Menu 3.2 TCP/IP and DHCP Ethernet Setup

Menu 11.3 - Remote Node Network Layer Options
Bridge Options:
Ethernet Addr Timeout (min)= 0
Type IP
Policy sets
here.
Type IP
Policy sets
here.
IP Policy Routing