Table 21-2 Menu 12.3.1 Edit Bridge Static Route - ZyXEL Communications PRESTIGE 650H User Manual

Prestige 650 Series User's Guide
The following table describes the Edit Bridge Static Route menu.
FIELD
Route # This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name Type a name for the bridge static route for identification purposes.
Active Indicates whether the static route is active (Yes) or not (No).
Ether Address Type the MAC address of the destination computer that you want to bridge the
packets to.
IP Address If available, type the IP address of the destination computer that you want to bridge
the packets to.
Gateway Node Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
21-4

Table 21-2 Menu 12.3.1 Edit Bridge Static Route

DESCRIPTION
Bridging Setup